888-643-6694 | sales@GearGrid.com
0
0
Subtotal: $0.00

No products in the cart.

Free-Standing Tube Wall Structure For GearGrid Turnout Gear Lockers

Free-Standing Tube Wall Structure For GearGrid Turnout Gear Lockers

FREE-STANDING TUBE WALL STRUCTURE FOR
GEARGRID TURNOUT GEAR LOCKERS

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Design, fabrication and installation of free-standing tube wall structure as specified herein.

NOTE: GEARGRID FREE-STANDING TUBE WALL STRUCTURES ARE DESIGNED FOR USE WITH GEARGRID WALL MOUNT LOCKERS ONLY. GEARGRID ASSUMES NO LIABILITY OR RESPONSIBILITY AND GIVES NO WARRANTY FOR USING FREE-STANDING TUBE WALL STURCTURE WITH ANY OTHER LOCKER TYPES OR MANUFACTURER’S PRODUCT.

1.2 RELATED SECTIONS

A. Section 10: Metal Wire Grid Lockers

1.3 SUBMITTALS

A. Product Data: Submit manufacturer’s product data and installation instructions.
B. Shop Drawings: Submit manufacturer’s shop drawings for each individual free-stranding unit of lockers.
C. Samples: Submit manufacturer’s standard color samples.
D. Owner’s Manual: Provide maintenance manual at closeout.
E. Warranty: Submit manufacturer’s standard warranty.

1.4 QUALITY ASSURANCE

A. Manufacturer shall have a minimum of five years experience in the direct manufacture of lockers and wall mounting systems.
B. Free-Standing Tube Wall Structure must be manufactured in United States of America.
C. Installer shall have 5 years of experience in locker assembly.

1.5 DELIVERY, STORAGE AND HANDLING

A: Delivery: Deliver materials to site in manufacturer’s original, unopened containers with labels identifying product and manufacturer’s name.
B: Storage: Store materials in a clean dry area.
C: Handling: Protect materials and finish during installation and handling to prevent damage.

PART 2 PRODUCTS

2.1 MANUFACTURER

A. GearGrid LLC 670 SW 15th Street, Forest Lake, MN 55025. Toll-free 888-643-6694. Phone 651-464-4468. Fax 651-464-4780. Web site www.geargrid.com. Email sales@geargrid.com.

B. NO SUBSTITUTIONS PERMITTED

2.2 FREE-STANDING TUBE WALL STRUCTURE

A. Model: (FSTWS) Free-Standing Tube Wall Structure Units
B. Free-Standing Tube Wall Structures are engineered specifically for each installation and are designed to ship in a knocked-down configuration for efficient shipping. Wall structure components are bolted together with hardware as supplied or identified.
C. Construction: Units shall be welded at all applicable joints. Forming of metal shall be completed by standard cold-forming operations. Use of fasteners will only be required to allow for knock-down shipping, securing units to mounting surface and on applicable accessories.
1. Vertical Posts: 4” x 4”, .250” wall thickness ASTM A513 steel tube
2. Floor Mounting Plates: ½” steel plate welded to Vertical Posts. 3/8” mounting holes as needed.
Mounting plate hole configurations subject to locker layout
3. Horizontal Frames: 4” x 4”, .1875” wall thickness ASTM A513 steel tube. Frames mechanically fastened to Vertical Posts with supplied or identified hardware.
a. Note: If PowerBars (Electric Raceway) are used, top Horizontal Frame will be 6” high x 4” wide, .1875” wall thickness steel tube

2.4 FINISH

A. General: All system components excluding assembly and mounting hardware and stainless steel components are to receive the standard finish.
B. Standard Finish: Components to be cleaned using a phosphatized bath, clear water rinse and electro-statically coated with a durable TGIC powder coating.
C. Color: _______________

Part 3 EXECUTION

3.1 EXAMINATION

A. Examine areas to receive Free-Standing Wall Structures. Notify architect if areas are not acceptable. Do not begin installation until unacceptable conditions have been corrected.

3.2 INSTALLATION

A. Assemble free-standing lockers in accordance with manufacturer’s instructions.
B. Use manufacturer’s hardware for assembly.

NOTE: SEE SAMPLE DRAWINGS NEXT PAGE

FREE-STANDING TUBE WALL STRUCTURE – EXAMPLE DRAWINGS
FOR REFERENC ONLY