Tubular Frame Wall – Fire & EMS

The Tubular Frame Wall provides an additional and alternative mounting option for our Standard and Two-Tier Wall Mount Lockers. The structure uses heavy-duty mounting plates to securely attach the frame to the floor in any desired location, while maintaining the benefits of typical wall mount installation.

Color Undecided

Red Baron

Brilliant Black

Crane Grey

Blue Streak

Burgundy

Evergreen

Autumn White

Custom

Undecided

Clear

Additional fees may apply for custom colors.
A GearGrid representative will reach out to confirm your color selection.

Add to Quote Request

Description
When compared to building a block or framed wall, the Tubular Frame Wall provides the additional benefits of reduced cost, improved airflow and enhanced light flow in the room. The Tubular Frame Wall allows lockers to mount on one or both sides of the structure, and will be engineered for your desired layout, locker size and quantity.

*Note: Wall Mount Lockers are sold separately from Tubular Frame Wall and are not included

Construction:

Units shall be welded at all applicable joints. Use of fasteners will only be required to allow for knock-down shipping, securing units to mounting surface and on applicable accessories.
- Vertical Posts: 4″ x 4″, .250″ wall thickness ASTM A513 steel tube
- Floor Mounting Plates: steel plate welded to vertical posts. ¹³⁄₁₆” mounting holes as needed
  *Note: Mounting plate hole configurations subject to locker layout
- Horizontal Frames: 4″ x 4″, 0.1875″ wall thickness ASTM A513 steel tube. Frames mechanically fastened to vertical posts with supplied or identified hardware
  *Note: If Power Bars (Electric Raceway) are used, top horizontal frame will be 6″ H x 4″ W, 0.1875″ wall thickness steel tube
Features
- Height: 86″H (without Power Bars) and 88.25″H (with Power Bars)
- Finish: Super Durable TGIC powder coat
- Shipping: Ships knocked down for ease of handling and reduced shipping costs
- Assembly: With simple tool it’s fast and easy
Specifications
Available Sizes:

Determined by locker layout

When compared to building a block or framed wall, the Tubular Frame Wall provides the additional benefits of reduced cost, improved airflow and enhanced light flow in the room. The Tubular Frame Wall allows lockers to mount on one or both sides of the structure, and will be engineered for your desired layout, locker size and quantity.

*Note: Wall Mount Lockers are sold separately from Tubular Frame Wall and are not included

Construction:

Units shall be welded at all applicable joints. Use of fasteners will only be required to allow for knock-down shipping, securing units to mounting surface and on applicable accessories.

Vertical Posts: 4″ x 4″, .250″ wall thickness ASTM A513 steel tube
Floor Mounting Plates: steel plate welded to vertical posts. ¹³⁄₁₆” mounting holes as needed
*Note: Mounting plate hole configurations subject to locker layout
Horizontal Frames: 4″ x 4″, 0.1875″ wall thickness ASTM A513 steel tube. Frames mechanically fastened to vertical posts with supplied or identified hardware
*Note: If Power Bars (Electric Raceway) are used, top horizontal frame will be 6″ H x 4″ W, 0.1875″ wall thickness steel tube

Height: 86″H (without Power Bars) and 88.25″H (with Power Bars)
Finish: Super Durable TGIC powder coat
Shipping: Ships knocked down for ease of handling and reduced shipping costs
Assembly: With simple tool it’s fast and easy